The Ceramic Best Brakes Pads are manufatured for safe and comfortable braking. Specially designed for trucks and cars with braking problems like Minivans, SUV´s and others problematics models of cars.
Our brakes pads has charactheristics that meet the standards of Original Equipment OE in Ceramic Brake Pads:
> 100% scorched, which is ready to stop inmediately because eliminate the need for initial break-in and reducing noise caused by pad glazing.
> The pre-burnishes which serves to remove the accumulated gases in its manufacturing process.
> High Quality of Ceramic Fibers.
> Chamfer include, to dissipate noise, heat and dust during brake-in process.
> Positive Molding Technology utilized by Original Equipment suppliers, uses extreme pressure to compress the friction material and bond it to the backing plate.
> Slotted to eliminate dust and noise.
> Our formulations is low in resins material to eliminate dust and noise.
> The Coefficient of Friction of our brake pads is FF.
SCORCHED
The Ceramic Brake Pads Best Brakes adds a scorched process to all your brake pads. This additional process forces any impurities out of the frictionmaterial and pre-burnishes the pads to greatily accelerate the brake-in process. The OEM (Original Equipment) process enhances key friction performance levels. Scorching raises initial cold effectiveness, stabilizes friction levels right out of the box, provides consistent performance across the entire operating range. During the scorching phase; each brake pad surface us super-heated to simulate the initial break-in proccess performed by installation technicians.
This additional step removes any uncured bonding agents eliminating the need for initial break-in and reducing noise caused by pad glazing. Scorching thermally conditions the pad material which yields a more consistent and higher friction level right out of the box. Scorching benefits the vehicle owner by promoting a more complete bed-in of new pads, increasing the effective stopping power from the first stop.
SCORCHING PROCESS MAIN FEATURES:
> Removes impurities such as bonding material
> Provides optimal stopping performance
> Reduces noise caused by pad glazing
> Delivers consistent performance across the entire operating range
Positive Molding Technology
Positive Molding Technology is an important factor in production of Best Brakes products. Positive molding results in a more uniform density in the production of the brake pad. It also allows using less resin content in formulation of the brake pad which can lead to improvement in the fading characteristic of the brake pad. The brake pads produced by positive molding process is a proven to have much better stopping performance. High resin increases fading, which can increase stopping distances up to 50%.
All Best Brakes brake pads are manufactured using the same positive molding process utilized by Original Equipment suppliers. Positive molding uses extreme pressure to compress the friction material and bond it to the backing plate. This process assures consistent friction material density throughout the pad, resulting in even wear and performance characteristics throughout the life the brake pad.
All our brake pads are manufactured using the same positive molding process utilized by Original Equipment suppliers (OE).
POSITIVE MOLDING TECHNOLOGY MAIN FEATURES :
> Mantains constant friction consistency
> Ensures better braking performance
> Delivers longer service life
> Requires less resin material
> Resists heat fade